Product List

Hammer Crusher

  • Hammer Crusher is mainly used for crushing medium-hard or brittle materials with hardness not more than 300Mpa and 15% moisture, such as coal, cement, gypsum, alumen, brick, tile, limestone, etc. It has the features of simple structure, big crushing ratio, high production efficiency, uniform particle size, etc. This equipment can be adjusted to reach various discharged granularity as the customers' requests.

    Working Principle
    The main working part of Hammer Crusher is the rotor with hammers.  The rotor consists of main shaft, disk, hinge pin and hammers.  A sieve plate is below the rotor. The motor drives the rotor to rotate at a high speed.    When the materials get into the crushing cavity, they are crushed by the rotating hammers, the crushed products which meet the required size can be discharged from the sieve plate and become the final products, the products with larger size are brought back to the crushed area for being re-crushed until they reach the required size.

    Product parameter

    Model Rotor speed (r/min) Input opening size(mm) Max. feed size (mm) Discharged Size (mm) Capacity (t/h) Power(kw) weight (t) Overall Dimension (L×W×H) (mm)
    Φ400×400 1500 145×450 100 0-30 5-8 7.5 0.9 844×942×878
    Φ600×400 1000 295×450 100 0-35 10-12 18.5 1.03 1054×972×111
    Φ600×600 1000 295×570 100 0-35 12-18 45 2.14 1315×840×150
    Φ800×600 1000 350×570 120 0-45 20-25 55 2.45 1515×2586×10
    Φ800×800 1000 350×850 120 0-45 35-45 55 3.05 1515×2831×10
    Φ1000×800 1000 580×850 200 0-45 25-40 110 6.5 3206×2210×15
    Φ1000×100 1000 580×1060 200 0-45 40-80 132 7.6 3514×2230×15
    Φ1250×800 750 650×850 200 0-45 20-50 132 11.7 2630×1780×20
    Φ1250×125 750 650×1330 200 0-45 90-110 185 13.2 2630×2180×20
    Φ1400×140 750 1050×154 250 0-45 120-170 280 17.2 2790×2800×23
    Φ1600×160 600 1500×178 350 0-60 220-280 450 22.8 3350×3120×26
    Any change of technical parameters, there is no further notice.
Hydraulic Cone Crusher   European Jaw Crusher
 
Productname   Quantity  
Country   CompanyName  
Contact
Tel   Fax  
E-mail*      
address  
The message